Personality Cafe banner

81 - 93 of 93 Posts

·
Registered
Joined
·
31 Posts
Here are some of mine:
IMG_20200421_181819.jpg

3D printing + basic woodworking (Just a bit of sawing, sanding + oiling + varnishing the wooden board) + basic modelling including putty and stuff + priming + spray painting. Eddy is unrelated, just a 3D print almost as large as a real head + handpainting

IMG_20200123_210500.jpg IMG_20200123_210517.jpg IMG_20200123_210625.jpg IMG_20200123_210553.jpg

Fully modular PCB arrangement system

To be continued....

Edit: All parts except from the screws and nuts are 3D printed (FDM, Material: PLA)
 

·
Registered
Joined
·
31 Posts
Part 2:

IMG_20200226_220201.jpg

IMG_20200226_220214.jpg IMG_20200226_220331.jpg IMG_20200226_220524.jpg
The silkscreen on the bottom side just looks gorgeous

IMG_20200226_220244.jpg

Electronics project, a PCB for high powered LEDs, designed the thing myself in eagle cad and ordered it, it was my first eagle project, I wanted to see how many LEDs I could fit onto 80x80mm, turned out 28 pieces was allright for the size and to keep it at a reasonable voltage

To be continued....
 

·
Registered
Joined
·
31 Posts
Part 3

Well, what can you do with a 3D printed modulare PCB frame and lots of PCBs which have the components hand soldered to them?
IMG_20200218_213823.jpg
IMG_20200211_214503.jpg
IMG_20200128_212934.jpg
IMG_20200204_203900.jpg



Thats right, one badass LED panel which is guaranteed to burn your eyes out if you were to stare for too long into the light

The huge panel is a 280x LED module. The units I've used are 1W each and its soooo fucking bright, I was actually blinded for a few minutes, and I didn't even look into the light directly and it was less than a few seconds

Also, please note, the PCBs used in these pictures a slightly different as they are the older design, the pictures in the above thread already are the newer design, which features a lot of improvements

Well then, enjoy, I hope I'll complete this project soon :)

Also, another Eddy, spraypainted with metallic paints
IMG_20200314_144503.jpg
 

·
Rustle Thy Jimmies
Joined
·
2,424 Posts
I have, in my immediate vicinity, three unfinished projects and some notes on starting a 4th that will probably never come to fruition because building a mini foundry/forge for aluminum and bronze is more effort than I feel like doing. Plus then it opens up a whole slew of options for artistic pursuits that I'm honestly just not entirely sure I'm ready to dive into and subsequently abandon at that moment.
 

·
Registered
Joined
·
5,938 Posts
Yeaaaaaaaaaa.... I don't deal well with deadlines either. ESPECIALLY self imposed deadlines, because the guy who issues them is asshole of the highest calibre and his deadlines are completely arbitrary with zero rationale behind them.
Add the issue of you knowing the guy putting out the deadlines tad too well to actually care.
 
81 - 93 of 93 Posts
Top